Repair Parts -- new and used -- moderated newsgroup for trading   >   Hand Tools   >   Pliers   >   Flat pliers   >   March pump te-7K-md

March pump te-7K-md


For Sale: March pump te-7K-md


Subject March pump te-7K-md
Ad is submitted by poster: Nicknamed the "work horse", and appropriately so, the Model TE-7 pump is the backbone of the MARCH product line. The TE-7R-MD standard pump is equipped with a 3/4 HP motor and wetted materials of polypropylene, with the exception of the rear housing, which is manufactured of Ryton® for additional strength.
A few of the wetted material options in the TE-7 are: all polypropylene, all Kynar®, stainless steel and Hastelloy®. Bushing material for the TE-7 ranges from the standard carbon to mica filled Teflon® and includes ceramic and a Teflon®/Ryton®/carbon material. Selection of the right bushing depends on the solution being pumped
The motor on the TE-7 pump is a true 3/4 HP, not a derated 1 HP. In addition to the standard 3/4 HP a 1 HP and 1 ½ HP motor can be supplied for the TE-7S and the TE-7H as well as various explosion proof and chemical duty motors.
The flexibility of the number 7 pump is evident in the wide variety of applications in which it is used. Various specific gravities can be handled by trimming the diameter of the impeller magnet assembly. The standard 3.750 inch impeller may be reduced in size to 3.125 inch to accommodate specific gravities of up to 2.0. There have been occasions when the front impeller shroud had been removed for a specific application.
As with all MARCH pumps, a wide variety of options are available. The MARCH model TE-7 is truly the "workhorse" of the product line and undoubtedly the most versatile.
SERIES 7 PUMPS INCLUDE MODELS:
R = Glass filled polypropylene
Flow rates range from 2 to 53 GPM maximum.
Feet of head range from 0' to 60' maximum.
1 ½" FPT inlet X 1" MPT outlet.
A 3/4 HP, 3450 rpm, 115/230 Volt, single phase or 230/460 Volt, 3 phase, 50/60 Hz motor is standard for all models.
A 1 ½ HP motor is available for the 7S or 7H model.
Explosion Proof motors available on all models.
All motor types TEFC with conduit box.
Glass filled polypropylene, carbon filled Kynar®, 316 stainless steel, ceramic, Viton®, Teflon®/Ryton® bushing, carbon bushing.
Computer cooling, photo processing, graphic printing, ion exchange recovery/development, and aquariums.
For more specs please email. Thanks!
repair--parts.com bears NO responsibility for this ad. Please report ads that do not follow our rules (on front page). Posted By: Polly Crane
Contact: P.Crane@repair--parts.com (Polly Crane) (this is a temporary forwarding address).