Repair Parts -- new and used -- moderated newsgroup for trading > Plastic Welders
> Kenwood cs-1575D 10 mhz oscilloscope
Kenwood cs-1575D 10 mhz oscilloscope
For Sale: Kenwood cs-1575D 10 mhz oscilloscope
Subject Kenwood cs-1575D 10 mhz oscilloscope
Ad is submitted by poster:
"Your One Stop Source for Sales & Calibration of Test & Measurement Equipiment"
*Kenwood CS-1575D 10 MHz Oscilloscope *
The CS-1575D is a 10 MHz? 2-channel oscilloscope capable of displaying waveform and phases simul-taneously. The frequency response is DC to 10 MHz (-3 dB)? the maximum sensitivity is 5 mV 3% and the sweep rate is 0.5 s/div to 0.5 s/div 3%. During observation of 2 phenomena? the left/right display and the simultaneous Lissajous waveform display are possible in addition to the conventional up/down display. Other versatile waveform display features include the simultaneous display of the Lissajous waveform and 0(degree) phase waveform? the dual triggering function and the auto-freerun function.
* Auto-freerun for displaying a trace even without signal input
* Up/down and left/right waveform display
* 0?phase and Lissajous pattern
* Convenient dual triggering
* Automatic CHOP/ALT switching in interlocking with the sweep rate
* Simultaneous dual-trace and Lissajous waveform display
* Close-up bezel for facilitating waveform photography
* High-sensitivity X-Y mode using CH1 as the Y axis and CH2 as the X axis
150mm rectangular, with internal graticule
Vertical amplifier (Common for CH1 and CH2) Operating modes
Dual-H: left/right dual-trace; Dual-V: up/down dual-trace; CH1 :CH1 trace only; CH2 "CH2 trace only; X-Y :CH1=Y axis, CH2=X axis
Vertical amplifier dual-trace switching
CHOP operation with the SWEEP TIME/DIV. 1ms or less.; ALT operation with the SWEEP TIME/DIV. 0.5ms or more
Vertical amplifier phase display
Phase display is possible simultaneous with the lissajous pattern; for the X-Y display mode, the 0 degree phase waveform may also be simultaneously displayed
Vertical amplifier sensitivity
1-2-5 steps, 10 ranges and fine adjustment
Vertical amplifier input impedance
Vertical amplifier frequency response
DC :DC to 10MHz(-3dB); AC :5Hz to 10MHz(-3dB)
Vertical response chopping frequency
Vertical response maximum input withstand voltage
Horizontal amplifier operating modes
X-Y mode is selectable using the mode switch; CH1:Y axis; CH2:X axis
Horizontal amplifier sensitivity
Horizontal amplifier Input impedance
Horizontal amplifier frequency response
DC : DC to 1MHz (-3dB); AC : 5Hz to 1MHz(-3dB)
Horizontal amplifier X-Y phase difference
Horizontal amplifier maximum input withstand voltage
0.5us/div to 0.5s/div +3% in 1-2-5 steps, 19 ranges and fine adjustment.
Dual : Automatic selection of CH1 and CH2 as the sync input.; CH1:CH2 signal; CH2:CH2 signal; LINE: Line power frequency; EXT :EXT:TRIG signal
External triggering input impedance
External triggering maximum input withstand voltage
External triggering sensitivity
DUAL, CH1, CH2 :0.5div (50Hz to 3MHz) 1 div (20Hz to 10MHz); EXT :0.2Vp-p (50Hz to 3MHz) 0.5V-p-p (20Hz to 10MHz)
Square wave, positive polarity
100Hz or 120Hz (double line frequency)
Trace rotation adjustment system
Semi-fixed controller on the front panel.
Power requiremeny power voltage
Power requirement line power frequency
Power requirement power consumption
Dimensions and weight dimensions
Dimensions and weight maximum dimensions
Dimensions and weight operating temperature and humidity
Dimensions and weight temperature and humidity guaranteed by the specifications
10 degreeC to 35 degree C, 85% or less (no condensation)
Dimensions and weight operating temperature
Dimensions and weight operating humidity
Accessory cables model CA-41 (2), Instuction manual(1), Power cable (1)
GOODS: ALL our items are FACTORY NEW
repair--parts.com bears NO responsibility for this ad. Please report ads that do not follow our
rules (on front page).
Posted By: Annabelle Sheppard
Contact: Annabelle.sheppard@repair--parts.com (Annabelle Sheppard) (this is a temporary forwarding address).
