Repair Parts -- new and used -- moderated newsgroup for trading > Industrial Metal Machines Parts
> Welder Parts
> TIG Welder parts
> Rutland furlmatic FM910-3 furlmatic
Rutland furlmatic FM910-3 furlmatic
For Sale: Rutland furlmatic FM910-3 furlmatic
Subject Rutland furlmatic FM910-3 furlmatic
Ad is submitted by poster:
DELIVERY NORMALLY TWO WEEKS DEPENDING ON YOUR EXACT REQUIREMENTS
The Furlmatic 910-3 is Marlec's upgraded model (1998) of the highly successful FM910 windcharger. The FM910-3 incorporates our latest 3-phase alternator, taken from the Rutland 913 design which delivers a further 25% more power than the original model. It retains its basic design which has been proven time and again in the harshest of environments under critical power supply requirements eg. seismic monitoring In Antarctica, communications for Himalayan expeditions
The Furlmatic model has a "furling" device that tilts the turbine horizontally at right angles to the prevailing wind at windspeeds above 35mph. This protects the turbine from the forces of excessive winds and reduces stresses on the turbine and tower.
Wherever there is a site that is unattended, remote and exposed the FM910-3 can be relied on. Professional applications such as monitoring, telemetry, communications, isolated agricultural uses, navigation aids, military field applications, rural street lighting, remote homes and many more.
Three phase Rutland "unique" design generator
Fine profile maximum efficiency aerofoil blades
Automatic thermostat protection in prolonged gales
Steel components are galvanised and epoxy coated for longevity Simple to install and maintain Designed to mount on standard size tube 61mm outside diameter (available worldwide)
SR200 Regulator - Shunt type regulator prevents battery overcharge
RWS200 Controller - Incorporates the SR200 Regulator, charge ammeter, dual battery voltage LED's, two battery connection terminals and switch for charging one or two battery banks simultaneously, solar panel input (maximum 50w when used in combination with FM910-3 windcharger). Housed in attractive white case with simple to follow graphics for installation.
Other System Components not included
Batteries, tower, cable & connectors
Batteries - We recommend deep cycle lead acid batteries, sealed or non-sealed 12V / 24V
Cable - Cable thickness depends on the overall length used between the wind generator, regulator and battery. For distances up to 20m a cable thickness of 2.5mm is recommended. The regulator should always be sited within 1.5m of the battery to minimise voltage losses and ensure accuracy of battery regulation.
Mounting pole for land based systems -the 910-3 can be installed on land using a 6m length of 61mm outside diameter tube. The mounting pole can be fixed into the ground or on pivot type base. A minimum height of 6m and of 4 guy wires is recommended. More details are given in the installation manual.
repair--parts.com bears NO responsibility for this ad. Please report ads that do not follow our
rules (on front page).
Posted By: Marcie Vinson
Contact: Marcievinson@repair--parts.com (Marcie Vinson) (this is a temporary forwarding address).
