Repair Parts -- new and used -- moderated newsgroup for trading > Industrial Metal Machines Parts
> Welder Parts
> MIG Welder parts
> comark infra red thermometer C818FS
comark infra red thermometer C818FS
For Sale: comark infra red thermometer C818FS
Subject comark infra red thermometer C818FS
Ad is submitted by poster:
* HACCP temperature danger zone indication with clear safe/unsafe LED warnings
Green - temperatures are within safety guidelines and outside danger zone
Red warning - temperatures are inside the HACCP danger zone and potentially unsafe -
HACCP danger zone set at +4°C to +60°C/+40°F to +140°F
* Target illumination shows measurement area so user can move closer for more accurate readings
* IP54 rated cases allow cleaning and rinsing (not submersible)
* Display simultaneously shows current and maximum temperature
* Instant, non-contact readings can reduce product wastage, chance of cross contamination and staff time carrying out checks
* Integral penetration probe allows potentially unsafe readings to be verified with accurate core temperature checks
* Probe has 3mm diameter for best compromise between durability and response time, stores safely in thermometer case and flips down for use
* Countdown timer - uses include- Monitoring cooking, cooling and food holding times as part of HACCP procedures and to alert when next HACCP check is due- Timer can be used as the main operating mode or can be a background operation while infra red or probe measurements are being used
* Audible alarm signal indicates the end of a countdown period
* Backlit display shows current temperature from infra red or probe plus maximum infra red temperature
* 7 second display hold with auto switch off
* Supplied with carrying pouch
Preset Emissivity at operating
For targets between +32°F and +150°F,
-30°F to +525°F/-35°C to +275°C
-40°F to +392°F/-40°C to +200°C
10 seconds to 7 hours 59 minutes
Class A Platinum thin film RTD
Under 8 seconds to 95% response
repair--parts.com bears NO responsibility for this ad. Please report ads that do not follow our
rules (on front page).
Posted By: Antonia Santos
Contact: A-santos@repair--parts.com (Antonia Santos) (this is a temporary forwarding address).
