Repair Parts -- new and used -- moderated newsgroup for trading > Industrial Metal Machines Parts
> Welder Parts
> MIG Welder parts
> Linear technology LT1086CM-3.3 3.3V low dropout pos vr
Linear technology LT1086CM-3.3 3.3V low dropout pos vr
For Sale: Linear technology LT1086CM-3.3 3.3V low dropout pos vr
Subject Linear technology LT1086CM-3.3 3.3V low dropout pos vr
Ad is submitted by poster:
Up for sale LINEAR TECHNOLOGY LT1086CM-3.3 3.3V Low Dropout Pos VR.
The information below is from the manufactures web site.
* Output Current of 1.5A, (0.5A for LT1086H)
* Operates Down to 1V Dropout
* Guaranteed Dropout Voltage at Multiple Current Levels
* 100% Thermal Limit Functional Test
* Available in 3-Pin TO-220 and 3-Pin DD Package
The LT�1086 is designed to provide up to 1.5A output current. All internal circuitry is designed to operate down to 1V input-to-output differential and the dropout voltage is fully specified as a function of load current. Dropout is guaranteed at several operating points up to a maximum of 1.5V at maximum output current. Dropout decreases at lower load currents. On-chip trimming adjusts the reference/ ouput voltage to 1%. Current limit is also trimmed, minimizing the stress on both the regulator and power source circuitry under overload conditions.
The LT1086 is pin compatible with older 3-terminal adjustable regulators. A minimum 10�F output capacitor is required on these devices.
The LT1086 offers excellent line and load regulation specifications and ripple rejection exceeds 75dB even at the maximum load current of 1.5A. The LT1086 is floating architecture with a composite NPN output stage. All of the quiescent current and the drive current for the output stage flows to the load increasing efficiency.
The LT1086 is available in a 3-pin TO-220 package and a space-saving surface mountable 3-pin DD package.
The LT�1086 is designed to provide up to 1.5A output current. All internal circuitry is designed to operate down to 1V input-to-output differential and the dropout voltage is fully specified as a function of load current. Dropout is guaranteed at several operating points up to a maximum of 1.5V at maximum output current. Dropout decreases at lower load currents. On-chip trimming adjusts the reference/ ouput voltage to 1%. Current limit is also trimmed, minimizing the stress on both the regulator and power source circuitry under overload conditions.
The LT1086 is pin compatible with older 3-terminal adjustable regulators. A minimum 10�F output capacitor is required on these devices.
The LT1086 offers excellent line and load regulation specifications and ripple rejection exceeds 75dB even at the maximum load current of 1.5A. The LT1086 is floating architecture with a composite NPN output stage. All of the quiescent current and the drive current for the output stage flows to the load increasing efficiency.
The LT1086 is available in a 3-pin TO-220 package and a space-saving surface mountable 3-pin DD package.
repair--parts.com bears NO responsibility for this ad. Please report ads that do not follow our
rules (on front page).
Posted By: Eugenia Dean
Contact: eugenia-dean@repair--parts.com (Eugenia Dean) (this is a temporary forwarding address).