Repair Parts -- new and used -- moderated newsgroup for trading > Industrial Metal Machines Parts
> Welder Parts
> MIG Welder parts
> Like new dingli zdyc-1035 1 ton electric lift stacker
Like new dingli zdyc-1035 1 ton electric lift stacker
For Sale: Like new dingli zdyc-1035 1 ton electric lift stacker
Subject Like new dingli zdyc-1035 1 ton electric lift stacker
Ad is submitted by poster:
DINGLI ZDYC-1035 1 Ton Electric Lift Stacker Like New
2006 DINGLI 1 Ton Electric Lift Stacker - Slightly used but Like New - LOW RESEVE Priced To Sell
* Rated Capacity (Q) 1000 kg (2200 lbs)
* Load Center (C) 500 mm (19.6 in)
* Lifting Height (43) 3500 mm (138 in)
* Maximum Dimension (h4) 3975 mm
* Handle Height (h2) 1385-1405 mm (54 - 55 in )
* Fork Length (l) 1120 mm (44 in)
* Fork Width (E) 570 mm (22.4 in)
* Turning Radius (Wa) 1668 mm (65.5 in)
* Wheel Base (Y) 1288 mm (50.7 in)
* Max Traveling Speed With/Without load 4/4.5 m/s (13/14.6 ft/sec)
* Traction Motor 0.9-1 kw (1.33 HP)
* Lifting Engine 2.2-3 kw (4 HP)
* Overall Length (L) 2040 mm (80 in)
* Overall Width (W) 852 mm (33.5 in)
* Overall Height (h1) 2270 mm (89 in)
* Net Weight 900 kg (1980 lbs)
* You may need a Forklift at your location for Delivery
* These machines are intended for level surface use. Do not use on inclined surfaces
* Always use outriggers & Interlocks properly
* Fall arresting devices and protection must be worn
* OSHA Compliance Operator Training is required to safely operate this equipment.
* All aerial lift standards require operators to read the operator's manual prior to use.
* Always perform pre-start inspection. These can cover controls, safety devices, machine components, and warning signs and decals.
* Operators must perform required pre-start inspections of the machine, as well as the workplace, in order to avoid possible unsafe conditions such as drop-offs, holes, bumps, floor obstructions, debris, overhead obstructions, inadequate surface support, and hazardous wind and weather conditions.
* Operators must ensure the lift is handled within the limits set by the manufacturer
* The safety of the operator as well as others depends on the actions of the operator; therefore, the operator must follow good safety practices accordingly
* All future repairs and maintenance to be made by a qualified person using equivalent replacement parts
* Always keep operator's manuals are on the machine
As with any piece of equipment, safety should be the primary concern. Remember every lift brand is different.
Each operator should familiarize themselves with that particular machine. If someone is not familiar, they should always refer to the operating manual provided.
Before each use, visually inspect the equipment. This inspection should include making sure parts are in proper working order, checking fluid levels, tire condition, proper tire inflation and the legibility of safety decals. It is equally important to survey the work area and adjacent space to gauge ground conditions and any overhead hazards such as power lines and hanging objects. Operators should also wear a safety harness while they are operating the machine. Each person who will operate the lift must understand the proper operation of the machine, its intended use and maintenance requirements.
Also understand any applicable aerial lift regulations.
You can find OSHA guidelines at this site. Information on ANSI rules is at this site.
Electrical battery charger included
Get notified when we have great sales.
Add our business to your favorites list
Satellite Receivers Off Air Antennas Satellite Dishes LNBF Motors Satellite Signal Meters Switches HeadSets Remote Controls
We receive a large amount of email each day, so please call us!
We answer our phones cheerfully and are ready to help!
http:// /Sat/Templates/call_Sadoun_today.jpg
Monday-Thursday 9 am to 7 pm EST
* When emailing us, please indicate item name & number. Also include your full name, and address.
* If a store item is out of stock, we will notify you immediately. Refund will be issued for items that can't be substituted
* Local pickup is accepted. Call to arrange pickup from our warehouse.
* If you find any damage to the goods you should note it on the Bill of Lading before signing the receipt.
* Image on the listing may represent the stock or actual product unless stated otherwise.
Thank you for your business and have a great day!
repair--parts.com bears NO responsibility for this ad. Please report ads that do not follow our
rules (on front page).
Posted By: Tina Dodson
Contact: tdodson@repair--parts.com (Tina Dodson) (this is a temporary forwarding address).
