Repair Parts -- new and used -- moderated newsgroup for trading > Industrial Metal Machines Parts
> Grinder Parts
> Surface Grinder Parts
> Millermatic 140 mig & spoolmate 100/ miller rebate
Millermatic 140 mig & spoolmate 100/ miller rebate
For Sale: Millermatic 140 mig & spoolmate 100/ miller rebate
Subject Millermatic 140 mig & spoolmate 100/ miller rebate
Ad is submitted by poster:
YOUR SOURCE FOR WELDING SUPPLIES
ARCAIR SLICE PACKS - SPOT WELDERS
__________________________________________________________________________________
The Millermatic® 140 is perfect for light fabrication, garage/body shops, auto body, and at home. It welds material 24 gauge to 3/16 inch. This all-in-one MIG machine has infinite voltage control with wire feed speed tracking for easy operator control. Runs on 115 Volt input power to go wherever you need to weld!
* INFINITE VOLTAGE CONTROL with Manual On/Off WIRE FEED SPEED TRACKING provides a broader operating range with finer control by automatically increasing or decreasing wire feed speed when voltage is adjusted.
* NEW Smooth Start patent-pending technology provides a smooth spatter-free start .Its the best starting machine in the small MIG machine catagory . No pop gun starts and no spatter to clean up.
* DURABLE CAST ALUMINUM FEEDHEAD incorporates dual groove quick-change drive rolls and spring-loaded tension arm with calibrated tension knob all designed to make set up easier and faster.
* SEMIAUTOMATIC CONSTANT VOLTAGE WIRE WELDING PACKAGE is capable of welding 24 gauge - 3/16 in (0.8 - 4.8 mm) mild steel.
* STANDARD BUILT-IN SOLID STATE CONTACTOR CIRCUIT makes wire electrically "cold" until trigger is pulled. Makes the unit safer, and is easier to position torch to work before starting to weld.
* USES 4 or 8 in SPOOLS and can be set up to weld with wire sizes .024 - .030 in mild/staninless steel and .030 -.035 in flux cored.
* Add the Spoolmateâ„¢ 3035 spool gun and SGA spool gun adapter for welding with .030 (0.8 mm) aluminum wire on 14 gauge to 1/8 in material.
* Easy access to output studs provides CONVENIENT POLARITY CHANGEOVER when changing from solid or flux cored wires.
* Built-in Contactor - For your safety, our built-in contactor makes wire electrically "cold" when not welding.
* Short Circuit Protection - Contact tip life is extended by the exclusive Miller short-circuit protection which easily resets with the release of the gun trigger.
* Thermal Overload Protection - Internal components are protected from damage by thermal overload protection which automatically shuts down the unit if duty cycle is exceeded or air flow and cooling are restricted.
* Miller's exclusive "Tip Saver" - Short circuit protection shuts down output when tip is shorted to the work. Extends contact tip life and protects internal components from damage. Trigger reset permits quick reset at torch.
* Flux Cored ( FCAW ), (gas and self-shielded).
* 10 ft (3 m), M-10 Miller MIG gun and cable assembly #195 605.
* 10 ft (3 m) work cable and clamp.
* Factory-installed gas solenoid valve.
* Smith Argon and AR/CO 2 Mix Regulator and gas hose.
* Spool of Hobart .024 solid wire and 2 .024 contact tips
* 2 contact tips for .030 wire
* Dual groove quick-change drive rolls for .024 or .030/.035 wire
* Information / settings chart.
* Set-up and operation video.
Solid Steel: .023 - .030 (0.6 - 0.8 mm)
Stainless: .023 - .030 (0.6 - 0.8 mm)
Flux Cored: .030 - .035(0.8 - 0.9 mm)
B & R WELDER REPAIR SERVICE INC.
4412 SOUTHERN BUSINESS PARK DRIVE
Hours : Mon-Fri 8-5 Sat 9-12 EST
Email questions to : autumn_woods@repair--parts.com
we only accept wire transfers. Please call for our banking info.
Personal checks take 2 weeks to clear
repair--parts.com bears NO responsibility for this ad. Please report ads that do not follow our
rules (on front page).
Posted By: Autumn Woods
Contact: autumn_woods@repair--parts.com (Autumn Woods) (this is a temporary forwarding address).
