Repair Parts -- new and used -- moderated newsgroup for trading > Industrial Metal Machines Parts
> Grinder Parts
> Surface Grinder Parts
> Iotech serial 488/4 4 channel ieee bus converter
Iotech serial 488/4 4 channel ieee bus converter
For Sale: Iotech serial 488/4 4 channel ieee bus converter
Subject Iotech serial 488/4 4 channel ieee bus converter
Ad is submitted by poster:
IOTech Serial 488/4 4 Channel IEEE Bus Converter
IEEE-488 Compatable with SH1, AH1, T6, L4, SR1, PP0, DC1, DT0, C0, & E1.
The Serial 488/4 is a four port serial RS-232 or RS-422 interface to the IEEE 488 bus. Each port can be independently programmed for baud rate, stop bits, data bits, parity and handshaking. The Serial 488/4 can inform the bus controller that it has received data through the use of the SRQ facility or by direct inquiry of the number of serial input bytes available.
The Serial 488/4 uses a command adress in which the serial port parameters may be specified and serial port or command status is returned. The serial data is then sent and received on a separate address or addresses, providing data transparency between the serial device and host controller.
The Serial 488/4 serial port configuration may be saved in non-volatile RAM to be used as the default settings when next powered on, allowing a once only configuration of the device for many applications.
We also accept money orders, cashier checks, and Western Union.
If you have any questions, please contact us at (***)-567-5101 or email us at r_morton@repair--parts.com.
repair--parts.com bears NO responsibility for this ad. Please report ads that do not follow our
rules (on front page).
Posted By: Roxanne Morton
Contact: r_morton@repair--parts.com (Roxanne Morton) (this is a temporary forwarding address).
