Repair Parts -- new and used -- moderated newsgroup for trading > Industrial Metal Machines Parts
> Grinder Parts
> Surface Grinder Parts
> Feed motors
> New oil press diesel expeller extruder vegoil biodiesel
New oil press diesel expeller extruder vegoil biodiesel
For Sale: New oil press diesel expeller extruder vegoil biodiesel
Subject New oil press diesel expeller extruder vegoil biodiesel
Ad is submitted by poster:
Yes, we also have Listeroid engine parts for easy assembly, ST generator heads, sawdust and oil feedcake pellet mills, producer gas units, other oil presses, and some other diesel engines. Please email us, sawyer335(at)gmail.com.
Yes, it is very real, and yes, it is very practical... weight, about 1500 pounds.
This press is an old-fashioned way to do the job; it uses an adjustable continuous screw design (40-60 RPM) to press oil from oil seeds such as Canola (rapeseed), sunflower, etc.
What is really nifty about this press is; it can use a diesel engine that ALSO runs on vegoil!!! (not included) ALL YOU NEED TO DO IS TO PUT THEM ON A BASE, ADD A BELT, AND RUN!
Another feature most folks appreciate is that this press is priced at about 10-20% of comparable presses!!
Will process around 6 Tons per day (24 hours) of oil seed, and oil yields will vary from 10-40%, depending on the seed, condition, etc. Gallons per day yield will be 300-900/day.
To look at it another way, start the press after breakfast, then go do your work, and when you come in for lunch and check on it, you will have 150 gallons or so of fuel oil available to fill up the tractor (or pickup, etc).
Another wonderful feature is that by using cold press techniques, the moist seed cake that is left over becomes high-grade, high protein animal feed which is VERY expensive, and VERY hard to find!!! ($200/Ton?!)
My thoughts are that they are VERY simple, and very plain, and VERY functional. Running them to this point in time indicates this, also.
Take a look at the pics, and see if you think the same as I do. I personally guarantee these units, also. The pics are of 2 ton units.
Oil Seed Production. If we assume an end yield of 100 gallons/acre, such as available with canola (rape) seed, castor beans, and sunflower seed, and assume a 20% cold press oil yield, it follows that we will get 2 tons per acre of oil seed, and that 80% of that production will STILL BE AVAILABLE for animal feed as a moist cake AFTER processing. ACTUAL yields have been reported as high as 12,000 pounds per acre, and 45% yield, which equates to 800 gallons per acre!!! Below is a link to a very efficient operation in Eastern Oregon. Please see: http:// /index.php?page=8
Winter rapeseed and some others can be grown as a winter rotation crop in much of the US which allows the primary crop to be grown without interruption or problem.
VERY IMPORTANT NOTE- PLEASE REMEMBER FOLKS, MECHANICAL THINGS CAN BE RISKY TO RUN, AND SHOULD ONLY BE LOOKED AT IF YOU WANT TO BE SAFE.
Other sizes up to 300T/day available, and we stock 2, 4, 6, 10, and 13 ton models. Please email me, rhaney@repair--parts.com for any questions.
Fair warning, we have a VERY limited supply...
20 May 2007 UPDATE- We have almost 300 of the units in the field now. Folks who use them for canola/rapeseed/mustard, and sunflower, all report very high yields, anywhere from 20% by weight to as much as 40%. We are told that flax, peanuts, and castor beans do well, also. We understand that the newest GMO sunflowers have up to 65% oil by weight!
If you navigate to , Russell there has good tips on running a screw press, and these are a few things we have discovered: We in America are used to "pushing the pedal to the metal!" If you have trouble with pressing, SLOW THE SPEED DOWN! If you use an electric motor, you may need to cut the speed by as much as half. A diesel engine used to run a press will be able to easily be slowed down as necessary. An electric motor may have to have a controller installed. We even received one machine back with a small motor pulley on the press input shaft where the LARGE pulley was supposed to go. They just don't do well at 150 RPM!!!!
Second, open the press screw feed handle to where 1 1/2 threads show at first. Then tighten in 1/8, or even 1/16 turn increments, and wait!! Let the machine do its work.
If you run old, dry oilseed, you may not be able to get anything from it! It greatly helps to water and heat the seed in this case, or even heat and oil it with other vegoil to start.
If you intend to use the vegoil for fuel in a diesel engine, plan on filtering; and the three golden rules for using alternative fuels in diesel engines are: heat and/or treat (chemically), and/or dilute. If you navigate to http://vegoilconversions.netfirms.com , Dana Linscott there has a great web site with most everything you need to get you up and running.
If you intend to use the press for soybeans or corn, which traditionally have VERY low oil yields, and do NOT use additional heat, hexane, etc, etc, you should plan on low oil returns. It is NOT practical to press soybeans in 10 or 20 below temperatures and expect significant amounts of oil!!! We strongly suggest you contact your local agricultural extension agent for help with planning oilseed crops, yields, etc. We now have soybean help!! If you send me an email, will send you Dan's phone number. He has high-quality presses with heat for soybeans.
One last thing; we do not anticipate fuel prices going back to one dollar per gallon. As a result, we are busy, and frequently waiting for a new order of presses to arrive. We do offer reservations for no charge, and if you just let us know when, we are glad to reserve one for you. Our email address is above.
may 22, 2007-We have a few unsold 2 ton units in stock, and a good supply of 6, 10, 13, and 18 Ton units. If you want one, please email me, rhaney@repair--parts.com
Each user is uniquely and specifically responsible for any damage, direct or indirect, consequential and/or collateral problems as a result of use, mis-use, or incorrect use of this information, parts, tools, and machinery items.
IF YOU ACTUALLY READ, PURCHASE AND READ, PURCHASE AND INSTALL OR USE EQUIPMENT OR PARTS OR TOOLS, THEN IT IS UNDERSTOOD THAT YOU HOLD THE PROVIDER(S) AND/OR SELLERS BLAMELESS.
NOTHING HEREIN IS TO BE TAKEN AS A LICENSE TO OPERATE OR A RECOMMENDATION TO USE ANY MACHINERY, ITEM, OR PART(S) YOU READ ABOUT, PURCHASE, OR EVEN OWN ALREADY FOR THE PURPOSES DISCUSSED IN THESE PAGES, AND ANY AND ALL CDS YOU MAY PURCHASE ARE TO BE USED STRICTLY FOR YOUR OWN READING PLEASURE.
If you do not agree with all these statements, please read no further, and do
repair--parts.com bears NO responsibility for this ad. Please report ads that do not follow our
rules (on front page).
Posted By: Robert Haney
Contact: rhaney@repair--parts.com (Robert Haney) (this is a temporary forwarding address).
