Repair Parts -- new and used -- moderated newsgroup for trading > Industrial Metal Machines Parts
> CNC Equipment Parts
> CNC Robots
> Welding Robots
> Miller dynsaty 200DX 120-460 vac part#907099011
Miller dynsaty 200DX 120-460 vac part#907099011
For Sale: Miller dynsaty 200DX 120-460 vac part#907099011
Subject Miller dynsaty 200DX 120-460 vac part#907099011
Ad is submitted by poster:
Maximum flexibility - Miller Electric combines advanced inverter technology with Auto-Lineâ„¢ technology, offering the most flexible AC/DC TIG/Stick power supply in the welding industry.
* DX - When the job demands greater control the DX provides pulse on/off, pulse frequency, peak % time, background amperage, initial amperage, initial slope time, final slope time and final amperage control.
* Dynasty 200 SD (#907099-01-1) Air cooled torch adapter #195378, (2) 50 mm Dinse International Style Power Cable Connections.
* 200 A at 18 V, 20% Duty Cycle
* 150 A at 16 V, 60% Duty Cycle
* 140 A at 15.6 V, 40% Duty Cycle
* 100 A at 14 V, 100% Duty Cycle
* 200 A at 28 V, 20% Duty Cycle
* 130 A at 25.2 V, 60% Duty Cycle
* 100 A at 24 V, 60% Duty Cycle
* 90 A at 23.6 V, 100% Duty Cycle
* 1-200 Amps (1-150 on 120 VAC)
* Pulsed TIG (GTAW-P) with DX model only
Advanced Squarewave arc for improved weldability on aluminum and magnesium using low power. Continuous high-frequency is NOT needed because of the advanced Squarewave arc.
AC frequency control range of 20 - 250 Hz provides control for a focused arc, resulting in better directional control to help produce desired arc/weld bead characteristics.
Built-in pulser reduces heat input; adds arc stability (DX model only).
Fan-On-Demandâ„¢ cooling system only operates when needed.
Auto-Lineâ„¢ provides state-of-the-art flexibility by automatically connecting to 120-460 VAC, single- or three- phase power without removing the covers to relink the power source. No longer is there a concern if you have the correct machine for the shop or the job site.
Portable in the shop or at the job site - at 45 lb the unit is easily moved from location to location.
Superior TIG/Stick arc performance on all input voltages. Even on the difficult-to-run electrodes like E6010.
Low OCV Stick is a simple design that reduces open-circuit voltage to 5-10 VDC when power source is not in use. This built-in circuit design eliminates the need for add-on voltage reducers.
Inverter-based, AC/DC power source has state-of-the-art operator interface allowing the user extra set-up capabilities in a compact machine. Features more precise control of output parameters.
HF arc starting provides non-contact arc starting that eliminates tungsten or material contamination.
Lift-Arcâ„¢ start provides TIG arc starting without the use of high frequency.
Programmable HF start parameters allows the operator to independently set HF starting conditions based upon process or application.
Extended Balance Control range (30-90% EN) allows precise cleaning control and prolonged tungsten life.
Wind Tunnel Technologyâ„¢ is an Internal air flow that protects electrical components and PC boards from dirt, dust, and debris, greatly improving reliability.
LVCâ„¢ Line Voltage Compensation
Keeps output of the power source constant regardless of fluctuation in input power ± 10%.
Squarewave technology is the AC output of a power source that has the ability to rapidly switch between the positive and negative half cycles of alternating current.
Internal components are protected from damage by thermal overload protection hich automatically shuts down the unit if duty cycle is exceeded or air flow and cooling are restricted.
This is a sale item and there is no returns or refunds offered.
repair--parts.com bears NO responsibility for this ad. Please report ads that do not follow our
rules (on front page).
Posted By: Lynn Mcgowan
Contact: l-mcgowan@repair--parts.com (Lynn Mcgowan) (this is a temporary forwarding address).
