Repair Parts -- new and used -- moderated newsgroup for trading > Industrial Metal Machines Parts
> CNC Equipment Parts
> CNC Robots
> Welding Robots
> Hp 3586A selective level meter w/option 003 tims tested
Hp 3586A selective level meter w/option 003 tims tested
For Sale: Hp 3586A selective level meter w/option 003 tims tested
Subject Hp 3586A selective level meter w/option 003 tims tested
Ad is submitted by poster:
Your Source for Quality Reconditioned Test Equipment. We are the best VALUE in test and measurement!
Hewlett-Packard 3586A / 003 Selective Level Meter
32.5 MHz Frequency Range, +20 to -130 dB Level Range, GPIB
Option 003 Transmission Impairments
Check out our other great test equipment
Description: The HP 3586A Selective Level Meter is made for use in the design, manufacture, installation, and maintenance of Frequency Division Multiplex (FDM) systems. The 3586A meets European CCITT standards. While FDM systems are fading away, the 3586A is still an outstanding general purpose wave analyzer. The 3586A's wide frequency coverage allows measurements to be made at both voice channel and carrier frequencies. Microprocessor control adds many ease-of-use features such as amplitude offset measurements of tone or noise levels in units of dBm, dBrnC, or dBpW. Convenience features include simultaneous analog and digital level displays, precise frequency setting with HP's fractional N synthesized local oscillator, and accurate frequency counter measurements.
Option 003 Transmission Impairments adds the following capabilities; phase jitter, noise with tone, signal to noise with tone ratio, and single level impulse noise measurements.
50 Hz to 32.5 MHz frequency range with 0.1 Hz resolution
Measurement range of +20 to –130 dBm with .01 dB resolution
20, 400, and 3100 Hz filters or Wideband measurement
< -116 dBm noise floor with 3100 Hz filter
75 Ohm or 10 Kohm unbalanced input
150 or 600 Ohm balanced inputs
Condition: Unit will be Reconditioned and Performance Tested to meet manufacturers specifications. Clean unit inside and out. Physically inspected, hardware re-torqued, connectors treated with a preservative, controls and switches lubricated as appropriate, power supply electrolytics tested, battery replaced. Burned in for 72 hours and then performance tested. All knobs and switches are in good condition.
What do our grades mean? Click Here
Accessories Available as Options:
Please contact us prior to purchasing an item if you have a question. We're glad to assist in any way we can.
Calibration is not guaranteed unless the item is advertised as calibrated or you purchase calibration at the time of sale. We maintain a laboratory with high quality equipment in order to verify the performance of the items we sell. We can provide ANSI Z540.1 calibration services on most items sold, if desired. Please contact us for Repair, Reconditioning, or Calibration services.
* Item may have some cosmetic imperfections such as scratches, dents, cracks, sticker residue, and discoloration due to normal wear and tear. Every effort is made to make our items as cosmetically acceptable as possible. Abnormal cosmetic conditions are mentioned in the item condition.
repair--parts.com bears NO responsibility for this ad. Please report ads that do not follow our
rules (on front page).
Posted By: Travis Mcmahon
Contact: TMcmahon@repair--parts.com (Travis Mcmahon) (this is a temporary forwarding address).