Repair Parts -- new and used -- moderated newsgroup for trading > Industrial Metal Machines Parts
> CNC Equipment Parts
> CNC Robots
> Robotic Welding
> Waste oil or gas burner kewanee forced draft .5- 1.4MBH
Waste oil or gas burner kewanee forced draft .5- 1.4MBH
For Sale: Waste oil or gas burner kewanee forced draft .5- 1.4MBH
Subject Waste oil or gas burner kewanee forced draft .5- 1.4MBH
Ad is submitted by poster:
HERE IS A KEWANEE BURNER REMOVED FROM A LEAKING FIREBOX BOILER. THIS WILL BURN NATURAL
OR PROPANE GAS, LIGHT, HEAVY, OR WASTE OILS. A FLIP OF THE GAS OIL SELECTOR SWITCH IS
ALL IT TAKES TO SWITCH FUELS! THIS IS A COMPLETE PACKAGE WITH NEW AIR ATOMIZING OIL
NOZZLE AND STAINLESS HOLDER, GAS PILOT, HONEYWELL R4795A CONTROL WITH UV FLAME DETECTOR,
COMBUSTION AIR PROVING SWITCH, 30 SECOND PURGE TIMING, WITH SINGLE ON OFF FIRING RATE.
THIS IS A NICE SIMPLE BURNER, 110VOLT CONTROLS AND 3/4 HP MOTOR. THIS BURNER WILL ADAPT TO MOST VESSELS.
THIS HAS BEEN TEST FIRED, AND COMES WITH AN ON BOARD ELECTRIC OIL HEATER AND NEW PUMP.YOU WILL
NEED TO SUPPLY 60 PSI AIR PRESSURE AT 6 CFM, A SMALL COMPRESSOR WILL HANDLE THIS.
A 4' LONG FIRING CHAMBER WILL ALLOW ROOM FOR THIS FLAME TO MIX PROPERLY. A 3' CHAMBER WILL REQUIRE A GOOD TARGET WALL. THE BURNER HEAD IS ROUND AND MEASURES JUST SHORT OF 8.5"
DIAMETER AND 5" LONG, FLANGE MOUNTED. PLEASE CALL WITH APPLICATION QUESTIONS OR ANY
OTHER QUESTIONS CONCERNING THIS OR ANY OTHER FUEL BURNING APPLICATION.
RICK (***)-317-6120 BOILER AND CONTROL SUPPLY!
repair--parts.com bears NO responsibility for this ad. Please report ads that do not follow our
rules (on front page).
Posted By: Francis Barnes
Contact: F-barnes@repair--parts.com (Francis Barnes) (this is a temporary forwarding address).
