Repair Parts -- new and used -- moderated newsgroup for trading > Industrial Metal Machines Parts
> CNC Equipment Parts
> CNC Robots
> Robotic Welding
> 200A dc tig/stick/mma welder 50A plasma cutter CT520D
200A dc tig/stick/mma welder 50A plasma cutter CT520D
For Sale: 200A dc tig/stick/mma welder 50A plasma cutter CT520D
Subject 200A dc tig/stick/mma welder 50A plasma cutter CT520D
Ad is submitted by poster:
Brand New CT520D (110VAC/220VAC Dual Voltage) 2008 Early Model from WELDERSMART
Brand New 200 AMP DC Tig /Stick/ MMA Welder with High Frequency arc initiation plus an inbuilt 50 AMP PLASMA CUTTER - 60% Duty Cycle at 200 amps.
This is an professional ultimate three-in-one-welder/cutter:
* CT520D (shown on the picture)
* Tig Torch and lead (on the picture)
* Plasma cutting torch and lead (on the picture)
* Earth Lead (on the picture)
* Stick Lead Socket and lead (on the picture)
* stick holder (on the picture)
* Air cutting regulator(not on the picture)
* cutting consumables (not on the picture)
* Advanced inverter technology, high working frequency, reduced size and weight easy to carry around.
* HF pressure increasing arc initiation and pulsation thermal arc initiation design, excellent arc initiation performance, ample welding current, superior cost / performance ratio
* Protected against overheating and over-current (very important!!!)
* Unique output characteristics design, excellent weld appearance.
* Wide working voltage range, high duty cycle, more suitable for factory continuous operation.
* 50 Amps Plasma cutter: Duty Cycle 60% at 50 Amps and 100% at 35 Amps. 0.55 inches clean cut with 7.2 inches per minutes; 1 inch severance cut with 3.1 inches per minute. Rated Output Current is 50Amps under AC 220V. Works in both 50 and 60 Hz with operating air pressure as 65 psi @ 3.2 cfm.
* 180 Amps Tig Welder: Duty Cycle 60% at 180 Amps ARC and 100% at 105 Amps ARC. Gas Flow: 2-5 L/Minute.
* 160 Amps Arc Welder: Duty Cycle 60% at 160 Amps and 100% at 95 Amps.
repair--parts.com bears NO responsibility for this ad. Please report ads that do not follow our
rules (on front page).
Posted By: Adriana Carney
Contact: Adriana_Carney@repair--parts.com (Adriana Carney) (this is a temporary forwarding address).
