Repair Parts -- new and used -- moderated newsgroup for trading > Industrial Metal Machines Parts
> CNC Equipment Parts
> CNC Robots
> Assembly Robots
> New jabsco phenolic ac transfer motor pump 12310-0003
New jabsco phenolic ac transfer motor pump 12310-0003
For Sale: New jabsco phenolic ac transfer motor pump 12310-0003
Subject New jabsco phenolic ac transfer motor pump 12310-0003
Ad is submitted by poster:
This is for 1 NEW Jabsco brand Phenolic AC motor pump Part # - 12310-0003
Jabsco Neoprene, Nitrile Compound
Stainless Steel (Supplied in Motor)
3/4" External Thread Garden Hose.
Gallons Discharge Height Above Pumping level
• SELF-PRIMING: Pump will produce suction lifts up to 7 feet when dry and to 15 feet when wetted. Be sure suction lines are airtight or pump will not self-prime.
• RUNNING DRY: Unit depends on liquid pumped for lubrication. Do not run dry for more than 30 seconds. Lack of liquid will damage the impeller.
• PRESSURES: For intermittant operation, pressure should not exceed 18 psi.
• TEMPERATURES: Nitrile impeller recommended for liquid temperatures of 50° to 180°F (10° to 82°C).
Designed as a low cost pump with improved chemical resistance for chemical feeding, transfer, circulation, filtration, metering, filling line use and similar applications. Handles pure solutions, foaming liquids, and thin emulsions.
Because of the chemical, resistance of phenolic plastic and 316 stainless steel, these pumps are widely used to pump photo chemicals, plating solutions, lab solutions, pharmaceuticals, cosmetics, weak acids, alkalies, liquid fertilizers, insecticides, dyes, detergents, waxes and many more.
Limit to liquids with viscosity less than 50 SSU.
repair--parts.com bears NO responsibility for this ad. Please report ads that do not follow our
rules (on front page).
Posted By: Jerri Alford
Contact: J_alford@repair--parts.com (Jerri Alford) (this is a temporary forwarding address).
