Repair Parts -- new and used -- moderated newsgroup for trading > Industrial Metal Machines Parts
> CNC Equipment Parts
> CNC Lathes
> Alpha metals/scs 500M sp ionic contamination ionograph
Alpha metals/scs 500M sp ionic contamination ionograph
For Sale: Alpha metals/scs 500M sp ionic contamination ionograph
Subject Alpha metals/scs 500M sp ionic contamination ionograph
Ad is submitted by poster:
Alpha Metals/Cookson Electronics/Specialty Coating Systems (SCS) 500M SP Ionograph for Ionic Contamination Testing
Comes with what you see in the pictures. If you don't see it, you probably wont get it.
Specifications are from SCS/Alpha Metals and may vary slightly due to upgrades, options, or revisions this unit may or may not have.
The units power up and recognize each other. They seem to work but we do not have the Testing Solution or expertise to check them any further. One of the plastic cylindrical filters is cracked (a picture is shown below).
Total List Price is: $11,658.00 NEW
The Main Test Unit's Serial Number Tag Reads:
Power Requirements: 115 VAC, 50/60 Hz, 2.5/1.2 A
Version: 5.1S 1990 Alpha-Metals
* Alpha Metals Ionograph 500M Remote Hydraulic Unit - SP
The Command Module's Serial Number Tag Reads:
Power Requirements: 115 VAC, 50/60 Hz, 3.0 A
* Ionograph 500 - Modular System Controller
Link to the Brochure: SCS Ionograph/Omegameters Brochure
Ionograph Series Ionic Contamination Systems:
Ionic test system for non-destructive process control testing in a variety of industries including PC Assembly, PC Fab, and the Medical Industry.
Dynamic Testing for ionic contamination of PCBs and components.
Precise Ionic Contamination Measurement for Effective Quality Control:
* Control of aqueous and semi-aqueous cleaning process for bare and assembled PC boards
* Testing to avoid corrosion damage associated with ionic contamination
* Cleanliness testing of sensitive, small devices including ICs, hybrids, medical implants, fixtures, assembly tools, and various discrete components.
SCS Ionic Contamination Test Systems are designed for fast and accurate ionic contamination cleanliness testing. Each module uses ultra-pure alcoholo/water extraction media and a patented "dynamic method" to test product samples quick and non-destructively.
The Ionograph 500M modules are operated by a personal computer or the Ionograph 500M Command Module to determine compliance with the cleanliness requirements of IPC-TM-650, and other industry standards. They can be used to measure the quality of incoming electronic components and circuit boards, and to evaluate flux contamination and monitor surface cleanliness.
Ionograph contamination testing can be used to control no-clean processes by determining the cleanliness of incoming raw boards and components prior to flux application, thus avoiding encapsulation of contaminants. Post-soldering/reflow ionic contamination testing detects radical flux coverage and thermal process changes. This precise testing technology can also be used to monitor the level of no-clean flux applied to substrates during spray or foam fluxing, helping to avoid electrical failures due to excessive flux deposits, and solder defects caused by insufficient flux.
Small Parts (SP) 500M Test Module Description:
Compact 6" x 6", .75-gallon test cell is capable of detecting contaminants with precision on individual components and very small devices.
Ionograph 500M Command Module Description:
Used to control up to 4 test modules in place of a personal computer. Stores up to 99 test profiles, and drives thermal printer output. Calibration and verification are preprogrammed.
Test Cell Size: 6" x 6" (15.2 cm x 15.2 cm)
Solution Capacity: .75 gal (2.84l)
Dimensions: 23"W x 27"D x 19"H (58.4 cm x 68.6 cm x 48.2 cm)
Weight: 65 lbs. (29 kg.) - does not include packaging
Power Requirements: 120 VAC, 50/60 Hz, 5.0 Amps
For More Pictures Please Click the Following Links:
* Picture 3 - RHU From the Right Side
* Picture 6 - Inside the Front of the RHU Unit
* Picture 7 - Inside the Right of the RHU Unit
* Picture 8 - Inside the Left of the RHU Unit
* Picture 9 - Inside the Back of the RHU Unit
* Picture 10 - Cracked Filter in the RHU Unit
* Picture 11 - Command Module's Display and Indicators
* Picture 12 - Command Module's Controls
* Picture 13 - Command Module's I/O Connections
* Picture 14 - Cables and Hose
* Picture 15 - Remote Hydraulic Unit's Serial Number Tag
* Picture 16 - Command Module's Serial Number Tag
repair--parts.com bears NO responsibility for this ad. Please report ads that do not follow our
rules (on front page).
Posted By: Ellen Thornton
Contact: ellenthornton@repair--parts.com (Ellen Thornton) (this is a temporary forwarding address).
