Repair Parts -- new and used -- moderated newsgroup for trading > Industrial Metal Machines Parts
> Grinder Parts
> Surface Grinder Parts
> Spindles
> System 3R macro to squareone adapter
System 3R macro to squareone adapter
For Sale: System 3R macro to squareone adapter
Subject System 3R macro to squareone adapter
Ad is submitted by poster:
Now you can run small, low cost and effective 31mm Holders if your machine is outfitted with a Macro Chuck. Eliminate problems: damaged fingers of your Combi Chuck, poor accuracy, 120 degree indexing and holders that are difficult to mount copper or graphite to.
Why convert to SquareOne's 31mm Holders?
1. Mount your electrode blank with 4 shcs
2. Mount your electrode blank with one center screw (flushing through the screw)
3. You will have the option to use dowels
5. Low cost aluminum or use hardened and ground steel holders
7. The internal clamp mechanism can be removed for cleaning and lubrication without disturbing the location and accuracy of this tool
8. Use this adapter on your Macro block to mill or grind your electrodes
9. Use this adapter on the ram of your edm machine if it has a Macro Chuck
10. Macro Concentric to SquareOne...........under .0001"
The 54mm holder is manufactured by system 3r
12 month warranty against defects or failure
International? Contact us for costs
repair--parts.com bears NO responsibility for this ad. Please report ads that do not follow our
rules (on front page).
Posted By: Paula Wilkerson
Contact: paula.wilkerson@repair--parts.com (Paula Wilkerson) (this is a temporary forwarding address).
